SOUTHEASTERN FOUNDRY PRODUCTS
& FOUNDRY COATINGS, Inc.
Tomorrow's Technology Here Today
Home
About
Products
alternative to high cost boron nitride
Locations
Contact

 SAND COATINGS - ZIRLITE 417G
Alcohol Base Zircon/Graphite Refractory Coating

DESCRIPTION:  ZIRLITE 417G is an alcohol based, zircon/graphite refractory coating.  ZIRLITE 417G has been formulated to substantially reduce metal penetration and burn on defects that can be encountered with medium and heavy sectioned iron and steel castings. The coating is supplied in a heavy slurry form. ZIRLITE 417G can be applied by flow coating, brushing, swabbing or spraying.

PHYSICAL PROPERTIES*:
Appearance:
Baume':
Density:
Solids Level:
Flash Point:

  Ship Parameters
Gray Slurry
74° - 78°
16.5 Ibs - 17.5 Ibs/gallon
70% - 74%
53° F (cc)

APPLICATION PROPERTIES: Flow Coat Parameters

Baume':
55° - 60°
  Brush/Swab Spray Dip
Baume': 68° - 72° 68° - 72° 42° - 46°

General properties, not specifications

DIRECTIONS FOR USE:

ZIRLITE 417G should be mixed thoroughly before use.  We recommend the use of an explosion-proof, motor-driven mixer.  ZIRLITE 417G is shipped as a heavy slurry produced to approximately 74° - 78° Baume´.  If necessary, the Baume´ can be reduced by reducing the ZIRLITE 417G with Isopropyl Alcohol (IPA 99%).  Caution:  Solvent is highly flammable.
While the information is presented in good faith and believed to be accurate, FCI does not guarantee satisfact results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use; and MAKES NO EXPRESS OR IMPLIED PRESENTATION OR WARRANTY AS TO THE FITNESS, MERCHANTABILITY OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR PROCESSES referred to herein. Nothing herein is to be construed as a recommendation to use any product or process in conflict with any patent.
Southeastern Foundry Products & Foundry Coatings, Inc. • 42 Longview Circle • Alabaster, AL 35007
Tel: (205) 620-0146 • Fax: (205) 620-6107 • E-mail: sefp@sefp.net