SOUTHEASTERN FOUNDRY PRODUCTS
& FOUNDRY COATINGS, Inc.
Tomorrow's Technology Here Today
Home
About
Products
alternative to high cost boron nitride
Locations
Contact

PYROTECH 300
Water Base High Refractory Modified Coating

DESCRIPTION: Pyrotech 300 is a high refractory modified water based coating. Pyrotech 300 has been formulated to substantially reduce metal penetration and burnon defects that can be encountered with small and medium sectioned ferrous and non-ferrous castings. This coating is supplied in a workable slurry form. Pyrotech 300 has been developed primarily for dipping.

PHYSICAL PROPERTIES*:
Appearance:
Baume':
Density:
Solids Level:


  Ship Parameters
Red Slurry
52° - 56°
11.00 lbs 14.00 lbs./gallon
48% - 52%

APPLICATION PROPERTIES*:
Baume':
  Dip
35° - 40°


General properties, not specifications

DIRECTIONS FOR USE:

Pyrotech 300 Tupy should be mixed with a pneumatic or electric mixer. Material must be mixed thoroughly in its container before diluting with water. Pyrotech 300 is designed to be diluted by the customer to its proper specification according to the application. Pyrotech 300 must be torch or oven dried prior to casting.


While the information is presented in good faith and believed to be accurate, FCI does not guarantee satisfact results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use; and MAKES NO EXPRESS OR IMPLIED PRESENTATION OR WARRANTY AS TO THE FITNESS, MERCHANTABILITY OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR PROCESSES referred to herein. Nothing herein is to be construed as a recommendation to use any product or process in conflict with any patent.
Southeastern Foundry Products & Foundry Coatings, Inc. • 42 Longview Circle • Alabaster, AL 35007
Tel: (205) 620-0146 • Fax: (205) 620-6107 • E-mail: sefp@sefp.net