DESCRIPTION:  HYBOND 3300 is a vegetable oil carried phenolic resin adhesive manufactured for the shell molding process to produce dimensionally accurate castings in ferrous and non-ferrous. HYBOND 3300 is environmentally designed for a very low VOC content and very low smoke emissions. HYBOND 3300 will reduce flashing and eliminate mold run out for both large and small surface area castings. HYBOND 3300’s melt point is reduced to allow ample time for placing cores in the mold before booking the cope and the drag.   HYBOND 3300 is adjustable to meet a wide range of application methods.

PHYSICAL PROPERTIES*: Appearance: Baume': Tensile: **Bond Time:

Ship Parameters Beige Slurry 70° - 90° 350 PSI minimum 80 - 250 seconds

Measure of time required for oil separation checked at 400°F with ten grams of material.

General properties, not specifications

DIRECTIONS FOR USE:

HYBOND 3300 should be mixed with a mechanical mixer.  Material must be mixed thoroughly in its container before application.  HYBOND 3300’s application techniques are designed for but not limited to paste bulbs, bonding frames, templates, and pumps.