SOUTHEASTERN FOUNDRY PRODUCTS
& FOUNDRY COATINGS, Inc.
Tomorrow's Technology Here Today
Home
About
Products
alternative to high cost boron nitride
Locations
Contact

 HI TEMP LADLE KOTE 700
Non-Wetting Modified Boron Nitride Coating

DESCRIPTION:  HI TEMP LADLE KOTE 700 is a modified boron nitride release designed for coating molten aluminum, magnesium, or zinc accessories. The coating which is in a slurry form can be applied by brushing or spraying. HI TEMP LADLE KOTE 700 will prevent burnon with consistent use and will extend the life of all molten aluminum, magnesium, or zinc accessories. The coating is designed to be reduced with water at the customer’s facility.

PHYSICAL PROPERTIES*:
Appearance:
Solids:
Baume':
Viscosity:
   Ship Parameters
Light Red
36% - 40%
40° - 50°
2500 - 3500 CPS
(Brookfield Viscometer Spindle 3 @ 20 RPM)
APPLICATION PROPERTIES   Flow Coat Parameters
Baume`: 35°- 40°
Brush Spray Dip
Baume`: 40° - 45° 40° - 45° 30° - 35°

*General properties, not specifications


DIRECTIONS FOR USE:

HI TEMP LADLE KOTE 700 should be mixed with a pneumatic or an electric mixer.  Material must be mixed thoroughly in its container before diluting. Caution: This coating should be protected from freezing at all times. Severe freezing could cause the coating to settle out.

 
While the information is presented in good faith and believed to be accurate, FCI does not guarantee satisfact results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use; and MAKES NO EXPRESS OR IMPLIED PRESENTATION OR WARRANTY AS TO THE FITNESS, MERCHANTABILITY OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR PROCESSES referred to herein. Nothing herein is to be construed as a recommendation to use any product or process in conflict with any patent.
Southeastern Foundry Products & Foundry Coatings, Inc. • 42 Longview Circle • Alabaster, AL 35007
Tel: (205) 620-0146 • Fax: (205) 620-6107 • E-mail: sefp@sefp.net