SOUTHEASTERN FOUNDRY PRODUCTS
& FOUNDRY COATINGS, Inc.
Tomorrow's Technology Here Today
Home
About
Products
alternative to high cost boron nitride
Locations
Contact

HI TEMP LADLE KOTE 315A
Ladle Coating

DESCRIPTION:  HI TEMP LADLE KOTE 315A is a blend of refractories designed for coating molten aluminum, iron, steel and brass accessories. The coating which is in a slurry form can be applied by brushing or spraying. HI TEMP LADLE KOTE 315A will prevent burnon with consistent use and will extend the life of all aluminum, iron, steel and brass accessories. The coating is designed to be reduced with water at the customer’s facility.

PHYSICAL PROPERTIES*:
Appearance:
Solids:
Baume':
Viscosity:
  Ship Parameters
Dark Blue/Gray Slurry
48% - 52%
55° - 65°
1700 - 2200 CPS
(Brookfield Viscometer Spindle 3 @ 20 RPM)
APPLICATION PROPERTIES   Flow Coat Parameters
Baume`: 35°-40°
Brush Spray Dip
Baume`: 50 - 60 50 - 60 30 - 40

*General properties, not specifications

DIRECTIONS FOR USE:

HI TEMP LADLE KOTE 315A should be mixed with a pneumatic or an electric mixer.  Material must be mixed thoroughly in its container before diluting. Caution: This coating should be protected from freezing at all times. Severe freezing could cause the coating to settle out.

While the information is presented in good faith and believed to be accurate, FCI does not guarantee satisfact results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use; and MAKES NO EXPRESS OR IMPLIED PRESENTATION OR WARRANTY AS TO THE FITNESS, MERCHANTABILITY OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR PROCESSES referred to herein. Nothing herein is to be construed as a recommendation to use any product or process in conflict with any patent.
Southeastern Foundry Products & Foundry Coatings, Inc. • 42 Longview Circle • Alabaster, AL 35007
Tel: (205) 620-0146 • Fax: (205) 620-6107 • E-mail: sefp@sefp.net