SOUTHEASTERN FOUNDRY PRODUCTS
& FOUNDRY COATINGS, Inc.
Tomorrow's Technology Here Today
TROUGH KOTE 100
Water Based Carbon Refractory Coating
DESCRIPTION: HI TEMP PERM CAST 100 is a blend of refractories designed for coating molten aluminum and copper alloy accessories. The coating which is in a slurry form can be applied by brushing or spraying. HI TEMP PERM CAST 100 will prevent burnon with consistent use and will extend the life of all aluminum and brass accessories. The coating is designed to be reduced with water at the customer’s facility.
Dark Gray to Black Slurry
6° - 8°
9.0 lbs - 10.5 lbs/gallon
General properties, not specifications
6° - 8°
DIRECTIONS FOR USE:
TROUGH KOTE 100 should be mixed with a pneumatic or an electric mixer. Material must be mixed thoroughly in its container before diluting. TROUGH KOTE 100 is designed to be diluted by the customer to its proper specification according to the application. TROUGH KOTE 100 must be torch or oven dried prior to casting.
While the information is presented in good faith and believed to be accurate, FCI does not guarantee satisfact results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use; and MAKES NO EXPRESS OR IMPLIED PRESENTATION OR WARRANTY AS TO THE FITNESS, MERCHANTABILITY OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR PROCESSES referred to herein. Nothing herein is to be construed as a recommendation to use any product or process in conflict with any patent.
Southeastern Foundry Products & Foundry Coatings, Inc. • 42 Longview Circle • Alabaster, AL 35007
Tel: (205) 620-0146 • Fax: (205) 620-6107 • E-mail: firstname.lastname@example.org