DESCRIPTION:  HI TEMP LADLE KOTE 512 is a blend of refractories designed for coating molten iron, steel and copper alloy accessories. The coating which is in a slurry form can be applied by brushing or spraying. HI TEMP LADLE KOTE 512 will prevent burnon with consistent use and will extend the life of all iron, steel and brass accessories. The coating is designed to be reduced with water at the customer’s facility.

PHYSICAL PROPERTIES*: Appearance: Solids: Baume': Density / Lbs:		Ship Parameters Gray Slurry 55% - 62% 68° - 72° 13.00 - 13.75
*General properties, not specifications

COATING PREPARATION:
Coating can be adjusted by water to appropriate viscosity level.  Recommended levels are as follows:

1. Viscosity, CPS (Brookfield Viscometer Spindle #3 @ 20 RPM)		3800 CPS - 4000 CPS
2. Baume':     a. Brushing     b. Spraying		76° - 84° 68° - 72°

DIRECTIONS FOR USE:

HI TEMP LADLE KOTE 512 should be mixed with a pneumatic or an electric mixer.  Material must be mixed thoroughly in its container before diluting.

Caution: This coating should be protected from freezing at all times. Severe freezing could cause the coating to settle out.